Card Type	Modem, Fax
Chip Set	Unidentified
I/O Options	Line in(RJ-11), line out (RJ-11)
Maximum Modem Rate	56.0Kbps
Maximum Fax Rate	14.4Kbps
Data Modulation Protocol	Bell 103A/212A, ITU-T V.21, V.22, V.22bis,V.23, V.32, V.32bis, V.34
Fax Modulation Protocol	V.17, V.21, CH2, V.27ter, V.29, V.33
Error Correction/Compression	MNP5, MNP10, V.42, V.42bis
Fax Class	Class I & II
Data Bus	8-bit ISA

CONNECTIONS
Function	Label		Function		Label
Line out		CN1		Line in		CN2

USER CONFIGURABLE SETTINGS
Setting	Label	Position
Plug and play enabled	J2	Pins 2 & 3 closed
Plug and play disabled	J2	Pins 1 & 2 closed

SERIAL PORT ADDRESS
Setting	J3
COM1 (3F8h)	Pins 3 & 5, 4 & 6 closed
COM2 (2F8h)	Pins 1 & 3, 4 & 6 closed
COM3 (3E8h)	Pins 3& 5, 2 & 4 closed
COM4 (2E8h)	Pins 1 & 3, 2 & 4 closed

INTERRUPT
Setting	J1/A	J1/B	J1/C	J1/D
IR/FONT>	Open	Open	Pins 1 & 2	Open
IRQ3	Open	Pins 1 & 2	Open	Open
IRQ4	Open	Open	Open	Pins 3 & 4
IRQ5	Open	Open	Open	Pins 1 & 2
IRQ10	Open	Pins 3 & 4	Open	Open
IRQ12	Open	Open	Pins 3 & 4	Open
IRQ15	Pins 3 & 4	Open	Open	Open
Disabled	Pins 1 & 2	Open	Open	Open
Note: Pins designated are in the closed position

SUPPORTED COMMAND SET

Basic AT Commands

AT, A/

A, B, E, H, M, O, P, Q, T, V, W, X, Y, Z

&C, &T, &W, &Y, &Z

Extended AT Commands

%C, %L, %Q

\A, \B, \G, \L, \N

-K, -Q

:E

+MS

S Registers

S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S14, S16, S18, S21, S22, S23, S24

S25, S26, S27, S28, S29, S31, S32, S33, S38, S40, S41

Note: See MHI Help File for full command documentation.