Card Type	Modem (synchronous/asynchronous)
Processor	Motorola 68000
Processor Speed	Unidentified
Chipset	Unidentified
Maximum Data Rate	9600bps
Data Bus	8-bit ISA
Data Modulation	Bell 103A/212A ITU-T V.22, V.22bis Telebit PEP
Error Correction/Compression	MNP5

CONNECTIONS
Function	Label		Function		Label
Line in		CN1		Line out		CN2

USER CONFIGURABLE SETTINGS
Setting	Label	Position
í Factory configured - do not alter	JP1	Unidentified
í Factory configured - do not alter	E25	Unidentified

SERIAL PORT CONFIGURATION
Address	IRQ	E22	E23	E24
3F8h (COM1:)	IRQ4	Pins 1 & 2 closed	Pins 1 & 2 closed	Pins 2 & 3 closed
2F8h (COM2:)	IRQ3	Pins 2 & 3 closed	Pins 1 & 2 closed	Pins 1 & 2 closed
3E8h (COM3:)	IRQ4	Pins 1 & 2 closed	Pins 2 & 3 closed	Pins 2 & 3 closed
2E8h (COM4:)	IRQ3	Pins 2 & 3 closed	Pins 2 & 3 closed	Pins 1 & 2 closed

TRANSMISSION LEVEL SELECTION
Setting	R5
0 dBm	4.32K ohm
-1.5 dBm	5.11K ohm
-3 dBm	6.04K ohm
-4.5 dBm	7.15K ohm
-6 dBm	8.66K ohm
-7.5 dBm	10.2K ohm
-9 dBm	12.1K ohm
-10.5 dBm	14.3K ohm
-12 dBm	16.9K ohm
-13.5 dBm	20.5K ohm
-15 dBm	24.3K ohm
Note: R5 is a plug-in resistor that can be used to change the transmitted power level.

SUPPORTED STANDARD COMMANDS

Basic AT Commands

+++, ‘comma’, A/

A, C, E, F, H, M, O, V, X, Z

&F, &T

S-Registers

S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S12

Note: See MHI documentation for complete information.