PATTON ELECTRONICS COMPANY
285/285S
|
Card Type |
Short Range Modem |
|
Chip Set |
Unidentified |
|
I/O Options |
25-pin serial port (RS-232), network interface via RJ-45 (RJ-11 optional) terminal block |
|
Wiring Type |
Unshielded twisted pair |
|
Maximum Data Rate |
115.2Kbps |
|
Data Bus |
External |
|
CONNECTIONS | ||||||
|
Function |
Label |
Function |
Label | |||
|
DTE/DCE serial port (25-pin connector) |
CN1 |
Twisted pair connection terminal blocks |
CN2 | |||
|
USER CONFIGURABLE SETTINGS | ||
|
Setting |
Label |
Position |
|
8msec RTS/CTS delay |
SW1/1 |
On |
|
No RTS/CTS delay |
SW1/1 |
Off |
|
Echo enabled |
SW1/2 |
On |
|
Echo disabled |
SW1/2 |
Off |
|
Carrier controlled by RTS |
SW1/3 |
On |
|
Carrier forced high |
SW1/3 |
Off |
|
Low line impedance (120Ohm) |
SW1/4 |
On |
|
High line impedance (120K Ohm) |
SW1/4 |
Off |
|
4 wire (full duplex mode) |
SW2 |
On |
|
2 wire (half duplex mode) |
SW2 |
Off |
|
DTE mode |
SW3 |
On |
|
DCE mode |
SW3 |
Off |
|
MISCELLANEOUS TECHNICAL NOTES |
|
Patton Electronics model 285S is the surge protected version of model 285 |
