Card Type	Modem (asynchronous)
Chipset	Multi-Tech Systems, Inc.
Maximum Data Rate	14.4Kbps
Maximum Fax Rate	14.4Kbps
Data Modulation	Bell 103A, 113, 212A ITU-T V.21 (MT1432MUI only), V.22, V.22bis, V.23, V.32, V.32bis
Fax Modulation	ITU-T V.17, V.21CH2, V.27ter, V.29
Error Correction/Compression	MNP5, V.42, V.42bis
Fax Class	Class II
Data Bus	Serial

CONNECTIONS
Function	Label	Function	Label
9V DC power in	CN1	Telephone line out	CN3
Macintosh serial port	CN2

AUTO-ANSWER CONFIGURATION
Setting	SW1
Standby, wait for incoming call	Position 3
Off	Position 2
On	Position 1

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
TD	Red	On	Modem is transmitting data
TD	Red	Off	Modem is not transmitting data
RD	Red	On	Modem is receiving data
RD	Red	Off	Modem is not receiving data
CD	Red	On	Carrier signal detected
CD	Red	Off	Carrier signal not detected

DIAGNOSTIC LED(S) (CON'T)
14 Status	Color		96 Status		Color	Condition
On	Red		On		Red	Modem connected at 12Kbps in V.32bis
Off	Red		On		Red	Modem connected at 9600bps
On	Red		Off		Red	Modem connected at 14.4Kbps
Off	Red		Off		Red	Modem connected at slower than 9600bps
LED		Color		Status			Condition
24		Red		On			Modem connected at 2400bps
24		Red		Off			Modem not connected at 2400bps
12		Red		On			Modem connected at 1200bps
12		Red		Off			Modem not connected at 1200bps
OH		Red		On			Modem is off-hook
OH		Red		Blinking			Modem is dialing in pulse mode
OH		Red		Off			Modem is on-hook
TR		Red		On			DTR signal is high
TR		Red		Off			DTR signal is low
EC		Red		On			Error correction enabled
EC		Red		Blinking			Data compression enabled
EC		Red		Off			Error correction disabled
FX		Red		On			Modem is connected in FAX mode
FX		Red		Off			Modem is not connected in FAX mode
LB		Red		On			Battery is low (approx. 10 minutes left)
LB		Red		Off			Battery is good

SUPPORTED STANDARD COMMANDS

Basic AT Commands

+++, A/

A, B, D, E, H, M, O, P, T, V, X, Y, Z

&D, &G, &P, &T

S-Registers

S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S25, S30

Note: See MHI help file for complete information.