ACTIONTEC ELECTRONICS, INC.
DESKVOICE 33.6K, DESKTALK 33.6K
|
Card Type |
Modem (asynchronous) |
|
Chipset |
Unidentified |
|
I/O Options |
Speakerphone (on DeskTalk only), voice, microphone in, speaker out |
|
Maximum Data Rate |
33.6Kbps |
|
Maximum Fax Rate |
14.4Kbps |
|
Data Modulation |
Bell 103A, 212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34 |
|
Fax Modulation |
ITU-T V.17, V.21CH2, V.27ter, V.29 |
|
Error Correction/Compression |
MNP5, V.42, V.42bis |
|
Fax Class |
Class I |
|
Data Bus |
16-bit ISA |
|
Card Size |
Full height, half length |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
Telephone line in |
CN1 |
Microphone in |
CN3 |
|
Telephone line out |
CN2 |
Speaker out |
CN4 |
|
INTERRUPT SELECTION | |||||||
|
Setting |
JP2/A |
JP2/B |
JP2/C |
JP2/D |
JP2/E |
JP2/F |
JP2/G |
|
3 |
Closed |
Open |
Open |
Open |
Open |
Open |
Open |
|
4 |
Open |
Closed |
Open |
Open |
Open |
Open |
Open |
|
5 |
Open |
Open |
Closed |
Open |
Open |
Open |
Open |
|
7 |
Open |
Open |
Open |
Closed |
Open |
Open |
Open |
|
10 |
Open |
Open |
Open |
Open |
Closed |
Open |
Open |
|
11 |
Open |
Open |
Open |
Open |
Open |
Closed |
Open |
|
12 |
Open |
Open |
Open |
Open |
Open |
Open |
Closed |
|
í Plug-N-Play |
Closed |
Closed |
Closed |
Closed |
Closed |
Closed |
Closed |
|
PLUG-N-PLAY | |||
|
Setting |
JP2/H |
JP2/I |
JP2/J |
|
í Enabled |
Closed |
Closed |
Closed |
|
Disabled |
Open |
Open |
Open |
|
SERIAL PORT ADDRESS SELECTION | ||||
|
Setting |
JP1/A |
JP1/B |
JP1/C |
JP1/D |
|
3F8h (COM1:) |
Open |
Open |
Closed |
Closed |
|
2F8h (COM2:) |
Closed |
Open |
Open |
Closed |
|
3E8h (COM3:) |
Open |
Closed |
Closed |
Open |
|
2E8h (COM4:) |
Closed |
Closed |
Open |
Open |
|
í Plug-N-Play |
Open |
Open |
Open |
Open |
|
SUPPORTED STANDARD COMMANDS |
|
Basic AT Commands |
|
+++, ‘comma’, A/ |
|
A, C, D, E, H, L, M, Q, V |
|
&C, &F, &K |
|
Extended AT Commands |
|
\G, \Q |
|
%C |
|
S-Registers |
|
The S-registers are unidentified. |
Note: See MHI help file for complete information. |
Proprietary AT Command Set
|
EXTENDED RESULT CODES | |
|
Type: |
Configuration |
|
Format: |
AT [cmds] Wn [cmds] |
|
Description: |
Selects the format of the CONNECT result code. |
|
Command |
Function |
|
í W0 |
CONNECT result codes to report DTE speed. |
|
W1 |
CONNECT result codes to report DTE speed. |
|
W2 |
CONNECT result codes to report DCE speed. |
|
W3 |
CONNECT result codes to report DTE speed and error correction/compression. |
|
W4 |
CONNECT result codes to report DTE speed, modulation, and error correction/compression. |
