Device Type	CD-ROM
Interface	SCSI (2)
Size	238 x 70 x 222mm
Spin Rate	1x, 2x
Formats Supported	CD-XA, CD-I Ready, CD Bridge, Photo CD, Red book, Yellow book
View	Top

CONNECTIONS
Function	Label	Function	Label
Audio out - left channel	CN1	Audio out - right channel	CN2

MISCELLANEOUS TECHNICAL NOTES

The SCSI ID switch (SW) is used to select the drive ID. The number in the window corresponds to the selected SCSI ID. To change the SCSI ID, press the "+" or "-" lever for higher or lower number. After the "7" ID there are 2 blank spots, the first is for "Play audio CD" mode, the second is not used at this time. To change SCSI ID turn power off/on for the change to take effect.