SANYO ELECTRIC CO., LTD.
HI-SY77E
|
Device Type |
CD-ROM |
|
Interface |
ATAPI |
|
Spin Rate |
4x |
|
Formats Supported |
CD-DA, CD-Bridge, CD-I (Mode 2, Form 1 & Mode 2, Form 2), CD-I Ready, CD-ROM (Mode 1) Photo-CD (Single & Multi-session), CD-XA (Mode 2, Form 1 & Mode 2 , Form 2) |
|
View |
Top |
|
CONNECTIONS |
|||
|
Function |
Label |
Function |
Label |
|
Audio line out |
CN1 |
Frame ground terminal |
CN3 |
|
Not Used |
CN2 |
|
|
|
ATAPI MASTER/SLAVE |
||||
|
Setting |
JP1/1 |
JP1/2 |
JP1/3 |
|
|
|
Single drive only |
Closed |
Open |
Open |
|
» |
Master in two drive system |
Closed |
Open |
Open |
|
|
Slave in two drive system |
Open |
Closed |
Open |
|
|
Master/Slave determined by Cable Select |
Open |
Open |
Closed |
Note: ‘Single drive’ refers to the sole drive connected to an IDE interface (there may be up to two on a given system). Master & Slave refer to two drives connected to an interface. |
||||
