Device Type

External CD Recorder/Reader

Interface

SCSI

Spin Rate (Read/Write)

1X, 2X, 4X, 8X 12X (Read) / 1X, 2X, 4x (Write)

Formats Supported Read

CD-XA, CD-DA, CD-R, CD-I, CD-ROM (Mode 1 & Mode 2), Photo-CD, Video CD, Red & Yellow Book, CD-Plus, CD-Extra

Formats Supported Write

CD-XA, CD-DA, CD-R, CD-I, CD-ROM (Mode 1 & Mode 2), Photo-CD, Video CD, Red & Yellow Book, CD-Plus, Enhanced CD, CD+G, CD-Midi, CD-Text

View

Top

CONNECTIONS

Function

Label

Function

Label

Audio line out - left

CN1

Audio line out - right

CN2

DRIVE SELECT ID

To set the SCSI ID, turn the dial on SW2 to the SCSI ID number that you would like to select. The default SCSI ID setting is 4.

USER CONFIGURABLE SETTINGS

Setting

Label

Position

í Parity check enabled

SW1/1

On

Parity check disabled

SW1/1

Off

í Termination enabled

SW1/2

On

Termination disabled

SW1/2

Off

í Factory configured - do not alter

SW1/3

Off

í Block mode disabled

SW1/4

Off

Block mode enabled

SW1/4

On

í Flash upgrade disabled

SW1/5

Off

Flash upgrade enabled

SW1/5

On

CONNECTIONS

Function

Label

Headphone jack

CN3

DIAGNOSTIC LED(S)

LED

Color

Status

Condition

LED1

Orange

On

Recording at 1X

LED1

Orange

Off

Recording at 2X or not recording at all

LED2

Orange

On

Recording at 2X

LED2

Orange

Off

Recording at 1X or not recording at all

LED3

Green

On

Power is on and no disc is loaded in drive

LED3

Green

Blinking

Disc is being accessed by drive

LED4

Green

On

Power is on and disc is loaded in drive

LED4

Green

Off

Power is off

Note: When drive is recording at 4X, both LED1 and LED2 will be on at the same time.