PLEXTOR
PX-12CSI, PX-12TSI
|
Device Type |
CD-ROM |
|
Interface |
SCSI |
|
Size |
5.25 in. half height |
|
Spin Rate |
12X |
|
Formats Supported |
CD-ROM Mode 1, CD-DA, CD-I, CD-XA (Mode 2, Form 1, Form 2), Video CD, Photo CD, CD Plus, CD-G, Karaoke |
|
View |
Top |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
Audio out |
CN1 | ||
|
DRIVE SELECT ID | ||||
|
Drive ID |
JP1/jumper 1 |
JP1/jumper 2 |
JP1/jumper 3 | |
|
0 |
Open |
Open |
Open | |
|
1 |
Closed |
Open |
Open | |
|
2 |
Open |
Closed |
Open | |
| » |
3 |
Closed |
Closed |
Open |
|
4 |
Open |
Open |
Closed | |
|
5 |
Closed |
Open |
Closed | |
|
6 |
Open |
Closed |
Closed | |
|
7 |
Closed |
Closed |
Closed | |
|
USER CONFIGURABLE SETTINGS | |||
|
Setting |
Label |
Position | |
| » |
Parity check enabled |
JP1/jumper 4 |
Closed |
|
Parity check disabled |
JP1/jumper 4 |
Open | |
| » |
SCSI termination enabled |
JP1/jumper 5 |
Closed |
|
SCSI termination disabled |
JP1/jumper 5 |
Open | |
| » |
Factory configured - do not alter |
JP1/jumper 6 |
Open |
| » |
Block mode disabled |
JP1/jumper 7 |
Open |
|
Block mode enabled |
JP1/jumper 7 |
Closed | |
| » |
Eject mode disabled |
JP1/jumper 8 |
Open |
|
Eject mode enabled |
JP1/jumper 8 |
Closed | |
|
Note:Block mode enables the CD-ROM as a boot drive when working in a UNIX environment. When Eject mode is enabled, a disc can not be ejected with the eject button. Software must be used in order to eject the disc. | |||
