Device Type	External Tape Drive
Interface	SCSI-2 Fast/Wide
Format	Unidentified
Sustained Transfer Rate	20 MBPS
Size	5.25 in. full height
View	Top

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Unidentified	On	Prompts user to load the cartridge.
LED1	Unidentified	Off	Cartridge is loaded
LED2	Unidentified	On	Drive is selected on the SCSI bus
LED2	Unidentified	Off	Drive is not selected on the SCSI bus
LED3	Unidentified	On	The drive is reading/writing compressed data
LED3	Unidentified	Off	The drive is reading/writing uncompressed data
Note: LED’s 4 through 10 each represent the different tape positions between BOT and EOT. When the tape is moving in the forward position, the LED’s light up sequentially starting from the BOT position. When the tape is moving in reverse, the LED’s light up sequentially in the reverse order.

MISCELLANEOUS TECHNICAL NOTES

The IPM is an adapter card that is available in four different configurations: 50-pin SCSI connector (2x), 68-pin SCSI connector (2x), 50-pin SCSI connector & Terminating Resistor, 68-pin SCSI connector & Terminating Resistor. The Termination Power is supplied by the SCSI interface through pin 36. This setting is only valid with this specific IPM installed.