NIC Type	Ethernet
Transfer Rate	10Mbps
Data Bus	32-bit EISA
Topology	Linear (10Base2) Star (10BaseT)
Wiring Type	RG58A/U 50ohm coaxial (10Base 2) AUI transceiver via DB-15 port (10Base2) Unshielded twisted pair (10Base T)
Boot ROM	Available

BOOT ROM
Setting		JP1
»	Disabled	Open
	Enabled	Closed

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Yellow	Off	Data is not being transmitted
LED1	Yellow	Blinking	Data is being transmitted
LED2	Green	Off	Data is not being received
LED2	Green	Blinking	Data is being received
LED3	Yellow	Off	No collision detected on network
LED3	Yellow	Blinking	Collision detected on network
LED4	Green	On	10BaseT link integrity exists
LED4	Green	Off	10BaseT link integrity broken
Note:LED4 is only functional when installed on a 10BaseT network.