Card Type	Network Interface Card
NIC Type	Ethernet
Boot ROM	Not available
Network Transfer Rate	1.6Mbps
Topology	Point-to-point, Point-to-multipoint, Infrastructure
Wiring Type	RS-232 serial
Maximum Modem Rate	115200bps

CONNECTIONS
Function	Label	Function	Label
Antenna connector	CN1	DC power connector	CN3
RS-232 (DB-9) connector	CN2

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Yellow	On	Station type and domain set by software
LED1	Yellow	Off	Station type and domain set by switches
LED2	Green	Off	Non-functioning LED - reserved for future use
LED3	Green	On	Operating as a master
LED3	Green	Off	Not operating as a master
LED4	Yellow	On	Operating as a station
LED4	Yellow	Off	Not operating as a station
LED5	Green	On	Operating in normal mode
LED5	Yellow	On	Initializing hardware
LED5	Red	On	Problem with hardware
LED6	Yellow	Blinking	Data is being received wirelessly
LED6	Yellow	Off	Data is not being received wirelessly
LED7	Green	Blinking	Data is being received on serial connection
LED7	Green	Off	Data is not being received on serial connection

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Station mode	SW2	Station
	Master mode	SW2	Master

DOMAIN SELECTION
Setting		Label	Position
»	Use domain 0	SW1	0
	Use domain 1	SW1	1
	Use domain 2	SW1	2
	Use domain 3	SW1	3
	Use domain 4	SW1	4
	Use domain 5	SW1	5
	Use domain 6	SW1	6
	Use domain 7	SW1	7
	Use domain 8	SW1	8
	Configuration menu	SW1	9

MISCELLANEOUS TECHNICAL NOTES

Model 7910 operates at 100 mW. Model 7911 operates at 500 mW.