MADGE NETWORKS, LTD.
SMART 16/4 CLIENT RINGNODE
|
NIC Type |
Token Ring |
|
Transfer Rate |
4/16Mbps |
|
Data Bus |
16-bit ISA |
|
Topology |
Ring |
|
Wiring Type |
Shielded/Unshielded twisted pair |
|
Boot ROM |
Available |
|
BOOT ROM | ||
|
Setting |
SW2/3 | |
| » |
Disabled |
Off |
|
Enabled |
On | |
|
COMPATIBILITY MODE | ||
|
Setting |
SW2/6 | |
| » |
Normal ISA bus timing |
On |
|
Alternate ISA bus timing |
Off | |
|
Note:Alternate ISA bus timing is used if the host computer is not 100% ISA bus compatible (such as the IBM PS/2 model 30-286) or if the Madge Ringnode diagnostics program fails to locate the NIC. | ||
|
DMA CHANNEL BUS | ||
|
Setting |
SW2/7 | |
| » |
Asynchronous bus (uses host system’s clock) |
Off |
|
Synchronous bus (uses NIC on-board clock) |
On | |
|
Note:The synchronous bus speed is used for systems that have a clock speed less than 10MHz. | ||
|
EXPANSION SLOT SIZE | ||
|
Slot Size |
SW2/5 | |
| » |
Automatic select |
On |
|
Forced 8-bit mode |
Off | |
|
Note:If an 8-bit transfer mode is required and the NIC is installed in a 16-bit slot, use forced 8-bit mode. If the NIC is to be used in a Novell Netware 386 file server, automatic select must be used. | ||
|
INTERRUPT REQUEST | ||
|
IRQ |
SW1 | |
| » |
3 |
Position 7 |
|
2/9 |
Position 8 | |
|
5 |
Position 6 | |
|
7 |
Position 5 | |
|
10 |
Position 4 | |
|
11 |
Position 3 | |
|
12 |
Position 2 | |
|
15 |
Position 1 | |
|
NETWORK SPEED | ||
|
Speed |
SW2/7 | |
| » |
16Mbps |
Off |
|
4Mbps |
On | |
|
Note:All cards on a segment must have this option set the same. | ||
|
BASE I/O AND BOOT ROM ADDRESS | ||||
|
Address |
Boot ROM Address |
SW2/1 |
SW2/2 | |
| » |
0A20-0A2Fh |
CC000-CDFFFh |
On |
On |
|
1A20-1A2Fh |
DC000-DDFFFh |
Off |
On | |
|
2A20-2A2Fh |
CE000-CFFFFh |
On |
Off | |
|
3A20-3A2Fh |
DE000-DFFFFh |
Off |
Off | |
|
CABLE TYPE | |
|
Type |
LB1 |
|
Shielded twisted pair (DB-9 connector) |
STP |
|
Unshielded twisted pair (RJ-45 jack) |
UTP |
