Card Type	Ethernet Transceiver
NIC Type	Ethernet
Maximum Onboard Memory	Unidentified
Boot ROM	Not available
Network Transfer Rate	10Mbps
Topology	Linear Bus, star
Wiring Type	Unshielded twisted pair, Shielded twisted pair AUI transceiver via DB-15 port
Data Bus	External

CONNECTIONS
Function	Label	Function	Label
AUI transceiver via DB-15	CN1	UTP connector (RJ-45)	CN2

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	SQE enabled	SW1	On
	SQE disabled	SW1	Off

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Green	On	Power is on
LED1	Green	Off	Power is off
LED2	Green	On	Network connection established
LED2	Green	Off	Network connection is not established
LED3	Yellow	On	Data is being transmitted
LED3	Yellow	Off	Data is not being transmitted
LED4	Yellow	On	Data is being received
LED4	Yellow	Off	Data is not being received

MISCELLANEOUS TECHNICAL NOTES

The AUI port should be directly connected to the workstation. If you cannot connect directly to the workstation, an AUI drop cable (which cannot exceed 3 feet in length) may be used.