NIC Type	Proprietary
Chip Set	SEEQ DC 8001
Data Bus	8-bit ISA
Network Transfer Rate	1Mbps
Topology	Linear Bus
Wiring Type	Unshielded twisted pair
Boot ROM	Available

CONNECTIONS
Function	Label
Unshielded twisted pair via 3-pin connector	J1

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	Base I/O address set to 300h	W1	Pins 1 & 2 closed
	Base I/O address set to 310h	W1	Pins 2 & 3 closed
»	Interrupt set to IRQ2	W3	Pins 2 & 3 closed
	Interrupt set to IRQ3	W3	Pins 1 & 2 closed
»	Boot ROM address set to EC000h	W5	Pins 1 & 2 closed
	Boot ROM address set to EE000h	W5	Pins 2 & 3 closed

DMA CHANNEL
Setting		W2	W4
»	DMA1	Pins 1 & 2 closed	Pins 1 & 2 closed
	DMA3	Pins 2 & 3 closed	Pins 2 & 3 closed

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Unidentified	On	Card has failed
LED1	Unidentified	Off	Card is operating normally