NIC Type	Transceiver
Transfer Rate	Unidentified
Data Bus	Transceiver
Topology	Linear Bus/Star
Wiring Type	Unshielded twisted pair` AUI Transceiver via DB-15 port
Boot ROM	Not available

TEST CONFIGURATION
Select	SW1
SQE test	Position 2
Link test	Position 1

DIAGNOSTIC LED(S)
LED	Status	Condition
LED1	On	Link test enabled
LED1	Off	Link test disabled
LED2	On	Power on
LED2	Off	Power off
LED3	On	Network traffic detected
LED3	Blinking	Data is being received
LED3	Off	Data is not being received
LED4	On	Large load of data is being transmitted
LED4	Blinking	Normal load of data is being transmitted
LED4	Off	Data is not being transmitted
LED5	On	Collision detected on port
LED5	Blinking	Twisted-pair to transceiver connection is broken
LED5	Off	No collision is detected
LED6	On	Polarity is good
LED6	Off	Polarity is reversed