NIC Type	Ethernet
Transfer Rate	10Mbps
Data Bus	16-bit MCA
Topology	Star
Wiring Type	Unshielded twisted pair AUI transceiver via DB-15 port
Boot ROM	Available

LINK INTEGRITY TEST
Setting		JP1
»	Enabled	Pins 2 & 3 closed
	Disabled	Pins 1 & 2 closed
Note:The link integrity test is only valid when the cable type is unshielded twisted pair.

CABLE TYPE
Type		JP2A - JP2I
»	Unshielded twisted pair	Pins 2 & 3 closed
	AUI transceiver via DB-15 port	Pins 1 & 2 closed

FACTORY CONFIGURED SETTINGS
Jumper	Setting
JP3	Unused

DIAGNOSTIC LED(S)
LED	Status	Condition
LED1	On	Twisted pair connection is good
LED1	Off	Twisted pair connection is broken
LED2	On	Data is being transmitted
LED2	Off	Data is not being transmitted
LED3	On	Collision detected on network
LED3	Off	Normal operation
LED4	On	Data is being received
LED4	Off	Data is not being received