NIC Type	Ethernet
Transfer Rate	10Mbps
Data Bus	32-bit EISA
Topology	Star Linear bus
Wiring Type	RG-58/U 50ohm coaxial Unshielded twisted pair AUI Transceiver via DB-15 port
Boot ROM	Not Available

CABLE TYPE
Type		JP1	JP3-10
»	RG-58A/U 50ohm	Pins 1 & 2 Closed	Pins 1 & 2 Closed
	AUI transceiver via DB-15 port	Pins 1 & 2 Closed	Pins 2 & 3 Closed
	Unshielded twisted pair	Pins 2 & 3 Closed	N/A

LINK INTEGRITY TEST
Setting		JP31
»	Enabled	Pins 1 & 2 Closed
	Disabled	Pins 2 & 3 Closed
Note:Link Integrity is only used with 10Base-T wiring. When using an AUI transciever, the test should be disabled.

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Green	On	Data is being transmitted or received
LED1	Red	Blinking	Data is not being transmitted or received
LED1	Red	Off	Twisted pair network connection is good