ADDTRON TECHNOLOGY COMPANY, LTD.
EP-200B
|
NIC Type |
Ethernet |
|
Transfer Rate |
10Mbps |
|
Data Bus |
PCMCIA TYPE II |
|
Topology |
Linear Bus |
|
Wiring Type |
RG-58A/U 50ohm coaxial |
|
Boot ROM |
Not available |
N1020
|
DIAGNOSTIC LED(S) | |||
|
LED |
Color |
Status |
Condition |
|
LED1 |
Green |
On |
Power on |
|
LED1 |
Green |
Blinking |
Data is being transmitted |
|
LED1 |
Green |
Off |
Power off |
|
LED2 |
Green |
On |
Network connection is good (UTP only) |
|
LED2 |
Green |
Blinking |
Data is being received (UTP only) |
|
LED2 |
Green |
Off |
Network connection is broken (UTP only) |
|
LED3 |
Yellow |
Blinking |
Collision detected on network |
|
LED3 |
Yellow |
Off |
No collision detected on network |
|
LED4 |
Yellow |
On |
Card is transmitting continuously (jabber) |
|
LED4 |
Yellow |
Off |
Normal operation |
|
Note: LEDs are located on media coupler. | |||