Card Type	Multi I/O card
Chip Set	Unidentified
Maximum Onboard Memory	Unidentified
I/O Options	Serial ports (2), Parallel port, Apple II game port (2), PC game port
Data Bus	8-bit ISA
Card Size	Half length, half height

CONNECTIONS
Function	Label	Function	Label
Serial port 1	J1	Apple II game port 1	J5
Serial port 2 (DTE configuration)	J2	Apple II game port 2	J6
Serial port 2 (DCE configuration)	J3	PC game port	J7
Parallel port	J4

USER CONFIGURABLE SETTINGS
Function	Label	Position
Game port enabled	JP2/G	Closed
Game port disabled	JP2/G	Open

PARALLEL PORT ADDRESS SELECTION
Setting	Label	Position
LPT1 enabled	JP2/P1	Closed
LPT1 disabled	JP2/P1	Open
LPT 2 enabled	JP2/P2	Closed
LPT 2 disabled	JP2/P2	Open

SERIAL PORT 1 ADDRESS SELECTION
Setting	Label	Position
COM1 enabled	JP2/C1	Closed
COM1 disabled	JP2/C1	Open

SERIAL PORT 1 INTERRUPT SELECTION
IRQ	Label	Position
IRQ4 enabled	JP1/4	Closed
IRQ4 disabled	JP1/4	Open

SERIAL PORT 2 SETTINGS (S - OPTION)
IRQ	Label	Position
IRQ3 enabled	JP1/3S	Closed
IRQ3 disabled	JP1/3S	Open
COM2 enabled	JP2/S2	Closed
COM2 disabled	JP2/S2	Open
Note: These options are only used when the board was received as an option S.

PARALLEL PORT INTERRUPT SELECTION
IRQ	Label	Position
IRQ7 enabled	JP1/7	Closed
IRQ7 disabled	JP1/7	Open
Note: LPT is only on Rev. D and up boards.

MISCELLANEOUS TECHNICAL NOTES

Note: To use the Apple II joystick(s) IC 746505 must be installed at U1. This IC is not required when using an IBM-type joystick.