Card Type	Sound card/CD-ROM
Chipset Controller	TMC
I/O Options	Line in, line out, CD-ROM interfaces (5), CD-ROM audio (3)
Maximum DRAM	N/A

CONNECTIONS
Purpose	Location	Purpose	Location
Panasonic CD-ROM interface	J1	CD audio in	J7
Mitsumi CD-ROM interface	J2	Line in	JK1
Sony/Wearnes CD-ROM interface	J4	Line out	JK2
CD audio in	J5	Philips CD-ROM interface	JP1
CD audio in	J6	IDE interface	JP2

CD-ROM INTERFACE INTERRUPT SELECTION
IRQ	JP8
3	Pins 1 & 2 closed
4	Pins 3 & 4 closed
5	Pins 5 & 6 closed
9	Pins 7 & 8 closed

CD-ROM INTERFACE ADDRESS SELECTION
AT Bus Address	IDE Address	JP7	JP9	JP10
200h	1F0h	Pins 2 & 3 closed	Pins 2 & 3 closed	Pins 2 & 3 closed
220h	170h	Pins 1 & 2 closed	Pins 2 & 3 closed	Pins 2 & 3 closed
240h	160h	Pins 2 & 3 closed	Pins 1 & 2 closed	Pins 2 & 3 closed
260h	150h	Pins 1 & 2 closed	Pins 1 & 2 closed	Pins 2 & 3 closed
300h	N/A	Pins 2 & 3 closed	Pins 2 & 3 closed	Pins 1 & 2 closed
320h	N/A	Pins 1 & 2 closed	Pins 2 & 3 closed	Pins 1 & 2 closed
340h	N/A	Pins 2 & 3 closed	Pins 1 & 2 closed	Pins 1 & 2 closed
360h	N/A	Pins 1 & 2 closed	Pins 1 & 2 closed	Pins 1 & 2 closed

CD-ROM INTERFACE 16-BIT DMA SELECTION
Channel	JP11
1	Pins 1 & 3, 2 & 4 closed
3	Pins 5 & 7, 6 & 8 closed

CD-ROM INTERFACE TYPE
Type	JP6 A	JP6 B
IDE	Pins 2 & 3 closed	Pins 1 & 2 closed
Mitsumi	Pins 1 & 2 closed	Pins 1 & 2 closed
Panasonic	Pins 1 & 2 closed	Pins 2 & 3 closed
Philips	Pins 2 & 3 closed	Pins 1 & 2 closed
Sony	Pins 2 & 3 closed	Pins 1 & 2 closed
Wearnes	Pins 2 & 3 closed	Pins 1 & 2 closed

IDE INTERUPT SELECTION
IRQ	JP3
14	Pins 1 & 2 closed
15	Pins 2 & 3 closed

IDE WAIT SELECTION
Setting	JP4
Disabled	Open
Enabled	Closed

CONFIGURATION TYPE SELECTION
Type	JP12
Software	Open
Hardware	Closed

CD-ROM AUDIO INTERFACE PIN-OUT TABLE
Connector	Diagram
J4
J5
J6

FACTORY CONFIGURED - DO NOT ALTER
Jumper	Position
RP1	N/A