Category	Digital to analog signal converter
Chipset Controller	Unidentified
I /O Options Supported	Digital signal input via module connector
Maximum Onboard Memory	N/A

CONNECTIONS
Purpose	Location	Purpose	Location
Output connector	H1	Potentiometer: ref. voltage adjust ch. 4-7	P1
Expansion card connector	H2	Potentiometer: ref. voltage adjust ch. 0-3	P2

CHANNEL 0 OUTPUT SIGNAL
» Setting		JP1/jumper A
»	Bipolar/-5 to 5V	Pins 2 & 3 closed
»	Unipolar/0 to 5V	Pins 1 & 2 closed

CHANNEL 1 OUTPUT SIGNAL
» Setting		JP1/jumper B
»	Bipolar/-5 to 5V	Pins 2 & 3 closed
»	Unipolar/0 to 5V	Pins 1 & 2 closed

CHANNEL 2 OUTPUT SIGNAL
» Setting		JP2/jumper A
»	Bipolar/-5 to 5V	Pins 2 & 3 closed
»	Unipolar/0 to 5V	Pins 1 & 2 closed

CHANNEL 3 OUTPUT SIGNAL
» Setting		JP2/jumper B
»	Bipolar/-5 to 5V	Pins 2 & 3 closed
»	Unipolar/0 to 5V	Pins 1 & 2 closed

CHANNEL 4 OUTPUT SIGNAL
» Setting		JP3/jumper A
»	Bipolar/-5 to 5V	Pins 2 & 3 closed
»	Unipolar/0 to 5V	Pins 1 & 2 closed

CHANNEL 5 OUTPUT SIGNAL
» Setting		JP3/jumper B
»	Bipolar/-5 to 5V	Pins 2 & 3 closed
»	Unipolar/0 to 5V	Pins 1 & 2 closed

CHANNEL 6 OUTPUT SIGNAL
» Setting		JP4/jumper A
»	Bipolar/-5 to 5V	Pins 2 & 3 closed
»	Unipolar/0 to 5V	Pins 1 & 2 closed

CHANNEL 7 OUTPUT SIGNAL
» Setting		JP4/jumper B
»	Bipolar/-5 to 5V	Pins 2 & 3 closed
»	Unipolar/0 to 5V	Pins 1 & 2 closed

MISCELLANEOUS TECHNICAL NOTES

The DM8-10 is a modular daughter-card designed to work with the Quatech PXB-721 or MXI-241. Channel 0 through channel 6 output is taken from pins 1 to 7, respectively, of header H1 while channel 7 output is taken from pin 11 of header H1, 2, or 3 of header H1. The rest of the pins of header H1 are grounded.