Card Type	Multi-I/O card
Chip Set	Unidentified
Maximum Onboard Memory	448KB DRAM
I/O Options	Game/MIDI port, parallel port, serial ports (2)
Data Bus	32-bit EISA

CONNECTIONS
Function	Label	Function	Label
Serial port 1 connector	J1	Game/MIDI port	J3
Serial port 2 connector	J2	Parallel port	J4

USER CONFIGURABLE SETTINGS
Function	Label	Setting
Game port enabled	SW2/4	On
Game port disabled	SW2/4	Off
Parallel port enabled	SW2/5	On
Parallel port disabled	SW2/5	Off
Clock/calendar enabled	SW2/6	On
Clock/calendar disabled	SW2/6	Off
Serial port ASYNC 2 enabled	SW2/7	On
Serial port ASYNC 2 disabled	SW2/7	Off
Serial port ASYNC 1 enabled	SW2/8	On
Serial port ASYNC 1 disabled	SW2/8	Off

SERIAL PORT 1 DTE COMMUNICATION SELECTION
Function	Label	Position
TXD, RXD normal	JP1	Pins 2 & 3, 4 & 5 closed
TXD, RXD exchanged in ASYNC 1	JP1	Pins 1 & 2, 3 & 4 closed
RTS, CTS normal	JP2	Pins 2 & 3 closed
RTS, CTS combined in ASYNC 1	JP2	Pins 1 & 2 closed
DSR, DTR normal	JP3	Pins 2 & 3 closed
DSR, DTR combined in ASYNC 1	JP3	Pins 1 & 2 closed
DCD, DTR normal	JP4	Pins 2 & 3 closed
DCD, DTR combined in ASYNC 1	JP4	Pins 1 & 2 closed
Note: To alter jumper connections, remove conductive traces with a sharp knife, and solder on new traces.

SERIAL PORT 2 DTE COMMUNICATION SELECTION
Function	Label	Position
TXD, RXD normal	JP5	Pins 2 & 3, 4 & 5 closed
TXD, RXD exchanged in ASYNC 2	JP5	Pins 1 & 2, 3 & 4 closed
RTS, CTS normal	JP6	Pins 2 & 3 closed
RTS, CTS combined in ASYNC 2	JP6	Pins 1 & 2 closed
DSR, DTR normal	JP7	Pins 2 & 3 closed
DSR, DTR combined in ASYNC 2	JP7	Pins 1 & 2 closed
DCD, DTR normal	JP8	Pins 2 & 3 closed
DCD, DTR combined in ASYNC 2	JP8	Pins 1 & 2 closed
Note: To alter jumper connections, remove conductive traces with a sharp knife, and solder on new traces.

SERIAL PORT 1 INTERRUPT SELECTION
IRQ		JP10	JP11	JP12	JP13
	2	Pins 1 & 2 closed	Open	Open	Open
	3	Open	Pins 1 & 2 closed	Open	Open
»	4	Open	Open	Pins 1 & 2 closed	Open
	5	Open	Open	Open	Pins 1 & 2 closed

SERIAL PORT 2 INTERRUPT SELECTION
IRQ		JP10	JP11	JP12	JP13
	2	Pins 2 & 3 closed	Open	Open	Open
»	3	Open	Pins 2 & 3 closed	Open	Open
	4	Open	Open	Pins 2 & 3 closed	Open
	5	Open	Open	Open	Pins 2 & 3 closed

SERIAL PORT 1 ADDRESS SELECTION
Setting	JP14	JP15	JP16	JP17
COM1 (3F8h)	Open	Open	Open	Pins 2 & 3 closed
COM2 (2F8h)	Open	Open	Pins 2 & 3 closed	Open
COM3 (1F8h)	Open	Pins 2 & 3 closed	Open	Open
COM4 (0F8h)	Pins 2 & 3 closed	Open	Open	Open

SERIAL PORT 2 ADDRESS SELECTION
Setting	JP14	JP15	JP16	JP17
COM1 (3F8h)	Open	Open	Open	Pins 1 & 2 closed
COM2 (2F8h)	Open	Open	Pins 1 & 2 closed	Open
COM3 (1F8h)	Open	Pins 1 & 2 closed	Open	Open
COM4 (0F8h)	Pins 1 & 2 closed	Open	Open	Open

PARALLEL PORT MODE SELECTION
Function	Label	Setting
I/O mode	JP9	Pins 2 & 3 closed
Printer mode	JP9	Pins 1 & 2 closed

PARALLEL PORT I/O ADDRESS SELECTION
Address	JP12
278h	Pins 5 & 6 closed
378h	Pins 4 & 5 closed

RAM CAPACITY SELECTION
Size		SW1/1	SW1/2	SW1/3	SW1/4
	0KB	Off	Off	Off	On
	64KB	On	Off	Off	On
	128KB	Off	On	Off	On
	192KB	On	On	Off	On
	256KB	Off	Off	On	On
	320KB	On	Off	On	On
»	384KB	On	On	On	On

STARTING ADDRESS SELECTION
Address		SW2/1	SW2/2	SW2/3
	0K	Off	Off	Off
	64K	On	Off	Off
»	128K	Off	On	Off
	192K	On	On	Off
	256K	Off	Off	On
	320K	On	Off	On
	384K	Off	On	On
	448K	On	On	On
NOTE: The starting address at 0K disables the memory.