Card Type	PCMCIA interface
Chip Set	Unidentified
I/O Options	PCMCIA Type II slot (JJ.612-1) PCMCIA Type III slot or PCMCIA Type II slots (2) (JJ.612)
Data Bus	8-bit ISA

CONNECTIONS
Function	Label	Function	Label
PCMCIA interface via proprietary connector	P6	PCMCIA interface via 50-pin header	P7
Note:A standard PCMCIA slot is provided on an external adapter box.

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	Factory configured - do not alter	JP4	Pins 1 & 2 closed
»	Factory configured - do not alter	JP5	Pins 1 & 2, 4 & 5 closed
»	Factory configured - do not alter	JP7	Pins 1 & 2, 5 & 6 closed
Note:JP1 is located under the faceplate of the external PCMCIA drive box.

MISCELLANEOUS TECHNICAL NOTES

Note: Three jumpers JP1, JP2 and JP3 are located on the drive unit under the drive unit cover. JP1 sets the base I/O address: 3E0h = open (default) or 1E0h = closed. JP2 and JP3 are factory configured and should not be altered: JP3 = open and JP2/pins 1 & 2 (pins nearest JP3) = closed.