Card Type	Hard drive controller card
Hard Drives supported	Two IDE (AT) drives
Floppy drives supported	Two 360KB, 720KB, 1.2MB, or 1.44MB drives
Data Bus	16-bit ISA
Card Size	Half-length, half-height card

CONNECTIONS
Function	Label	Function	Label
40-pin IDE(AT) connector	J1	4-pin connector - drive active LED	JP2
34-pin cable connector - floppy drive	J2

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	IDE interface enabled	J3	Closed
	IDE interface disabled	J3	Open
»	Factory configured - do not alter	JP1	Unidentified
»	Factory configured - do not alter	JP3	Unidentified
»	Factory configured - do not alter	JP4	Unidentified