Data Bus	16-bit ISA
Card Size	Half height, half length
Hard Drives Supported	Two IDE(AT) devices
Floppy Drives Supported	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Label	Function	Label
40-pin IDE(AT) connector	CN1	10-pin serial port 2 - internal	CN5
34-pin cable connector - floppy drive	CN2	25-pin parallel port - external	CN6
16-pin game port	CN3	IDE IOCHRDY signal	J1
9-pin serial port 1 - external	CN4	2-pin drive active LED	J2

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	Serial port 2 address is 2F8h (COM2:)	JP1	Pins 1 & 2 closed
	Serial port 2 address is 2E8h (COM4:)	JP1	Pins 2 & 3 closed
»	Serial port 2 enabled	JP2	Pins 1 & 2 closed
	Serial port 2 disabled	JP2	Pins 2 & 3 closed
»	Game port enabled	JP3	Pins 1 & 2 closed
	Game port disabled	JP3	Pins 2 & 3 closed
»	Serial port 1 address is 3F8h (COM1:)	JP4	Pins 1 & 2 closed
	Serial port 1 address is 3E8h (COM3:)	JP4	Pins 2 & 3 closed
»	Parallel port address is LPT2:	JP5	Pins 1 & 2 closed
	Parallel port address is LPT3:	JP5	Pins 2 & 3 closed
»	Serial port 1 enabled	JP6	Pins 1 & 2 closed
	Serial port 1 disabled	JP6	Pins 2 & 3 closed
»	Floppy interface enabled	JP7	Pins 1 & 2 closed
	Floppy interface disabled	JP7	Pins 2 & 3 closed

USER CONFIGURABLE SETTINGS (CON’T)
Setting		Label	Position
»	Hard drive is connected to IDE interface	JP8	Pins 1 & 2 closed
	Hard drive is not connected to IDE interface	JP8	Pins 2 & 3 closed
»	IDE(AT) interface enabled	JP9	Pins 1 & 2 closed
	IDE(AT) interface disabled	JP9	Pins 2 & 3 closed
»	Parallel port enabled	JP10	Pins 1 & 2 closed
	Parallel port disabled	JP10	Pins 2 & 3 closed