Hard Drives supported	Two IDE (AT) drives
Floppy drives supported	Two 360KB, 720KB, 1.2MB, or 1.44MB drives
Data Bus	16-bit ISA
Card Size	Half-length, full-height card

CONNECTIONS
Function	Location	Function	Location
10-pin serial port 1 - internal	J1	Bus mouse port - external	J5
10-pin serial port 2 - internal	J2	25-pin parallel port - external	J6
16-pin game port	J3	40-pin IDE(AT) connector	J7
34-pin cable connector - floppy drive	J4	Drive active LED	JLED

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	IDE(AT) interface enabled	JP1	Pins 1 & 2 closed
	IDE(AT) interface disabled	JP1	Pins 2 & 3 closed

PARALLEL PORT ADDRESS SELECTION
Setting	JP5	JP6
LPT2 (278h)	Closed	Open
LPT3 (3BCh)	Pins JP5/1 & JP6/2 closed
Disabled	Open	Closed

SERIAL PORT 1 ADDRESS SELECTION
Setting	JP2	JP3	JP4
COM1 (3F8h)	Pins 2 & 3 closed	Pins 1 & 2 closed	Pins 1 & 2 closed
COM2 (2F8h)	Pins 2 & 3 closed	Pins 2 & 3 closed	Pins 1 & 2 closed
COM1 & COM2	Pins 1 & 2 closed	Pins 1 & 2 closed	Pins 2 & 3 closed
Disabled	Pins 1 & 2 closed	Pins 2 & 3 closed	Pins 2 & 3 closed

MOUSE BUS INTERRUPT SELECTION
IRQ	JP7/A	JP7/B	JP7/C	JP7/D
2	Open	Open	Open	Closed
3	Open	Open	Closed	Open
4	Open	Closed	Open	Open
5	Closed	Open	Open	Open