Data bus:	32-bit, VL-bus
Size:	Half-length, half-height card
Hard drive supported:	Two IDE (AT) Interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
40-pin IDE(AT) Interface connector	CN1
34-pin control cable connector - floppy drive	CN2
Game port	CN3
10-pin serial port 2 - internal	CN4
9-pin serial port 1 - external	CN5
25-pin parallel port	CN6
2-pin connector - drive active LED	JP18

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Floppy drive enabled	JP2	pins 1 & 2 closed
	Floppy drive disabled	JP2	pins 2 & 3 closed
»	Game Port enabled	JP6	pins 1 & 2 closed
	Game Port disabled	JP6	pins 2 & 3 closed
»	Serial port 1 interrupt = IRQ4	JP16	pins 1 & 2 closed
	Serial port 1 interrupt = IRQ3	JP16	pins 2 & 3 closed
»	Serial Port 2 interrupt = IRQ3	JP17	pins 1 & 2 closed
	Serial Port 2 interrupt = IRQ4	JP17	pins 2 & 3 closed

PARALLEL PORT CONFIGURATION
LPT/Address		JP3	JP9
»	LPT1/378h	pins 1 & 2 closed	pins 1 & 2 closed
	LPT2/278h	pins 1 & 2 closed	pins 2 & 3 closed
	Disabled	pins 2 & 3 closed	n/a

SERIAL PORT 1 CONFIGURATION
COM/Address		JP4	JP10
»	COM1/3F8h	pins 1 & 2 closed	pins 1 & 2 closed
	COM3/3E8h	pins 1 & 2 closed	pins 2 & 3 closed
	Disabled	pins 2 & 3 closed	n/a

SERIAL PORT 2 CONFIGURATION
COM/Address		JP5	JP11
»	COM2/2F8h	pins 1 & 2 closed	pins 1 & 2 closed
	COM4/2E8h	pins 1 & 2 closed	pins 2 & 3 closed
	Disabled	pins 2 & 3 closed	n/a