Data bus:	16-bit, ISA
Size:	Half-length, Full-height card
Hard drive supported:	Two IDE (AT) Interface drives
Floppy drives supported:	360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
25-pin parallel port	CN1
9-pin serial port - external	CN2
40-pin IDE(AT) interface connector	CN3
34-pin control cable connector - floppy drive	CN4
Game port	CN5
10-pin serial port - internal	CN6
4-pin connector - drive active LED	CN7
2-pin connector - optional IOCHRDY for IDE	J13

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	No other hard drive interface exists	J10	pins 2 & 3 closed
	Two or more hard drive interfaces exist	J10	pins 1 & 2 closed
»	IDE type AT enabled	J11	pins 2 & 3 closed
	IDE type XT enabled	J11	pins 1 & 2 closed
»	Game port enabled	J20	pins 1 & 2 closed
	Game port disabled	J20	pins 2 & 3 closed

FLOPPY DRIVE PORT CONFIGURATION
Address		J6	J7
»	Primary	pins 1 & 2 closed	pins 1 & 2 closed
	Secondary	pins 1 & 2 closed	pins 2 & 3 closed
	Disabled	pins 2 & 3 closed	n/a

IDE PORT CONFIGURATION
Address		J8	J9
»	1F0h	pins 1 & 2 closed	pins 1 & 2 closed
	1F7h	pins 1 & 2 closed	pins 2 & 3 closed
	Disabled	pins 2 & 3 closed	n/a

PARALLEL PORT CONFIGURATION
LPT/Address		J14	J15
»	LPT1/378h	pins 1 & 2 closed	pins 1 & 2 closed
	LPT2/278h	pins 2 & 3 closed	pins 1 & 2 closed
	Disabled	n/a	pins 2 & 3 closed

SERIAL PORT 1 CONFIGURATION
COM/Address		J16	J17
»	COM1/3F8h	pins 1 & 2 closed	pins 1 & 2 closed
	COM3/3E8h	pins 2 & 3 closed	pins 1 & 2 closed
	Disabled	n/a	pins 2 & 3 closed

SERIAL PORT 2 CONFIGURATION
COM/Address		J18	J19
»	COM2/2F8h	pins 1 & 2 closed	pins 1 & 2 closed
	COM4/2E8h	pins 2 & 3 closed	pins 1 & 2 closed
	Disabled	n/a	pins 2 & 3 closed