Data bus:	16-bit, ISA
Size:	half-length, full-height card
Hard drive supported:	Two IDE (AT) Interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
40-pin IDE (AT) Interface connector	CN1
34-pin control cable connector - floppy drive	CN2
4-pin connector - drive active LED	CN3

USER CONFIGURABLE SETTINGS
Function	Location	Setting
Floppy drive port enabled	JP5	closed
Floppy drive port disabled	JP5	open
Hard disk port enabled	JP6	closed
Hard disk port disabled	JP6	open