Data bus:	16-bit ISA
Size:	Half length, half-height card
Hard drive supported:	Two IDE(AT) interface drives
Floppy drives supported:	360KB, 720KB, 1.2MB, 1.44MB

CONNECTIONS
Function	Location
40-pin IDE(AT) interface connector	J1
34-pin control cable connector - floppy drive	J2
4-pin connector - drive active LED	JP1

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	IDE interface direct interrupt select	JP2	pins 2 & 3 closed
	IDE interface active interrupt select	JP2	pins 1 & 2 closed
»	Normal I/O speed enabled	JP3	open
	High I/O speed enabled	JP3	closed
»	Floppy drive interface enabled	JP4	closed
	Floppy drive interface disabled	JP4	open