Data bus:	16-bit ISA
Size:	Three-quarter length, full-height card
Hard drive supported:	Two IDE(AT) interface drives
Floppy drives supported:	360KB, 720KB, 1.2MB, 1.44MB

CONNECTIONS
Function	Location
15-pin connector - game port	CN1
40-pin control cable connector - hard drive	CN2
34-pin control cable connector - floppy drive	CN3
9-pin serial port 2 - internal	CN4
9-pin serial port 1 - external	CN5
25-pin parallel port - external	CN6
4-pin connector - drive active LED	JP1

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Serial port 1 enabled	JP2	pins 1 & 2 closed
	Serial port 1 disabled	JP2	pins 2 & 3 closed
»	Game port enabled	JP3	pins 1 & 2 closed
	Game port disabled	JP3	pins 2 & 3 closed

USER CONFIGURABLE SETTINGS(CONTINUED)
Function		Location	Setting
»	Floppy drive interface primary address select	JP4	pins 1 & 2 closed
	Floppy drive interface alternate address select	JP4	pins 2 & 3 closed
»	Parallel port primary address select	JP5	pins 1 & 2 closed
	Parallel port alternate address select	JP5	pins 2 & 3 closed
»	IDE interface enabled	JP6	pins 1 & 2 closed
	IDE interface disabled	JP6	pins 2 & 3 closed
»	Serial port 2 enabled	JP7	pins 1 & 2 closed
	Serial port 2 disabled	JP7	pins 2 & 3 closed
»	Serial ports 1 & 2 primary address select	JP8	pins 1 & 2 closed
	Serial ports 1 & 2 alternate address select	JP8	pins 2 & 3 closed