Data bus:	16-bit, ISA
Size:	Half-length, full-height card
Hard drive supported:	Two IDE (AT) Interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
40-pin IDE(AT) Interface connector	JP1
4-pin connector - Drive active LED	JP2
10-pin serial port (COM2/4) - internal	JP3
15-pin game port - internal	JP4
34-pin control cable connector - floppy drive	JP5
10-pin serial port (COM1/3) - external	JP6
25-pin parallel port (LPT1/2/3) - external	JP25

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Floppy drive enabled	JP10	pins 1 & 2 closed
	Floppy drive disabled	JP10	pins 2 & 3 closed
»	Two floppy drives supported	JP11	pins 1 & 2 closed
	Not used	JP11	pins 2 & 3 closed

SERIAL PORT CONFIGURATION
JP3	JP6	Jumper JP12	Jumper JP13	Jumper JP14
COM2	COM1	pins 1 & 2 closed	pins 1 & 2 closed	pins 1 & 2 closed
disabled	COM1	pins 1 & 2 closed	pins 2 & 3 closed	pins 1 & 2 closed
COM1	COM2	pins 2 & 3 closed	pins 1 & 2 closed	pins 1 & 2 closed
COM1	disabled	pins 2 & 3 closed	pins 1 & 2 closed	pins 2 & 3 closed
COM2	disabled	pins 1 & 2 closed	pins 1 & 2 closed	pins 2 & 3 closed
disabled	COM2	pins 2 & 3 closed	pins 2 & 3 closed	pins 1 & 2 closed
disabled	disabled	n/a	pins 2 & 3 closed	pins 2 & 3 closed

PARALLEL PORT CONFIGURATION
JP25	Jumper JP15	Jumper JP16
LPT2 enabled	pins 1 & 2 closed	pins 1 & 2 closed
LPT1 enabled	pins 1 & 2 closed	pins 2 & 3 closed
LPT3 enabled	pins 2 & 3 closed	pins 1 & 2 closed
Disabled	pins 2 & 3 closed	pins 2 & 3 closed