Data bus:	16-bit, ISA
Size:	Half-length, half-height card
Hard drive supported:	Two IDE (AT) Interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
4-pin connector - Drive active LED	CN1
2-pin connector - Ground	JP1
40-pin IDE(AT) Interface connector	CN2
34-pin control cable connector - floppy drive	CN3

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Hard drive enabled	JP2	open
	Hard drive disabled	JP2	closed
»	Floppy drive enabled	JP2A	open
	Floppy drive disabled	JP2A	closed