Data bus:	32-bit, EISA
Size:	Three/quarter-length, full-height card
Hard drive supported:	Two ESDI drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
34-pin control cable connector-floppy drive	P1
34-pin control cable connector-hard drive	J5
20-pin data cable connector-drive 0	J6
4-pin connector-Drive active LED	J10
20-pin data cable connector-drive 1	J11

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Floppy drive enabled	JP7	closed
	Floppy drive disabled	JP7	open
»	Three concurrent floppy drives supported	JP8	Pins 1-2 closed
	4MB floppy drives supported	JP8	Pins 2-3 closed

MISCELLANEOUS TECHNICAL NOTES

Jumper JP1 is factory configured - do not alter.