Card Type	Hard drive controller
Hard Drives Supported	Up to 7 SCSI-2 Fast devices
Floppy Drives Supported	Two 360KB, 720KB, 1.2MB, or 1.44MB drives
Data Bus	32-bit EISA
Card Size	Half length, full height

CONNECTIONS
Function	Location	Function	Location
50-pin SCSI connector - external	CN1	34-pin cable connector - floppy drive	CN3
50-pin SCSI connector - internal	CN2	4-pin connector - drive active LED	CN5

USER CONFIGURABLE SETTINGS
Function	Label	Position
Floppy drive enabled	JP1	Closed
Floppy drive disabled	JP1	Open

DIAGNOSTIC LED (CN4)
Color	Status	Condition
Unidentified	On	Terminators missing
Unidentified	1 flash	EPROM failure
Unidentified	2 flashes	Local RAM failure
Unidentified	3 flashes	SCSI chip or interface failure
Unidentified	4 flashes	Internal data bus failure
Unidentified	5 flashes	Internal address bus failure
Unidentified	6 flashes	Bus master chip failure
Unidentified	Blinking	Fuse blown

MISCELLANEOUS TECHNICAL NOTES

Remove terminating resistors only when using internal and external devices at the same time.