Card Type	Multi-I/O
Video Processor	6845
Maximum Onboard Memory	32KB DRAM
I/O Options	SASI/SCSI connector, clock/calendar, light pen port, parallel port, video port (3), RF modulator connector
Data Bus	8-bit ISA
Video Types Supported	Monochrome/CGA
Highest Resolution Supported	640 x 350
Hard Drives Supported	Up to 7 SASI or SCSI devices

CONNECTIONS
Function	Label	Function	Label
Parallel or SASI/SCSI port	J1	Light pen port	J5
Test connector	J2	CGA video out	J6
1.5V AA battery connector	J3	Composite video out	J7
RF modulator connector	J4	Monochrome video out	J8

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	J1 is a parallel port	SW1/1	Off
	J1 is a SASI/SCSI port	SW1/1	On
»	Automatically detect the adapter type being used by software	SW1/4	On
	Send all video signals to the monochrome monitor	SW1/4	Off
»	Monochrome video disabled when monochrome monitor is off or not connected	SW1/5	On
	Monochrome video enabled even when no monitor is available	SW1/5	Off
»	Red signal sent to monochrome display	SW1/6	On
	Red not signal sent to monochrome display	SW1/6	Off
»	Green signal sent to monochrome display	SW1/7	On
	Green not signal sent to monochrome display	SW1/7	Off
»	Blue signal sent to monochrome display	SW1/8	On
	Blue not signal sent to monochrome display	SW1/8	Off

MONITOR TYPE SELECTION
Setting		SW1/2	SW1/3
»	Card acts as both monochrome and color displays	Off	Off
	Card acts as monochrome display only	Off	On
	Card acts as color display only	On	Off
	Card behaves like Graphix Plus card in monochrome graphics mode	On	On