Data bus:	16-bit, ISA
Size:	Full-length, full-height card
Hard drive supported:	Two RLL ST506/412 drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB or 1.44MB drives

CONNECTIONS
Function	Location
4-pin connector - drive active LED	JP1
20-pin data cable connector - drive 2	P1
20-pin data cable connector - drive 1	P2
34-pin control cable connector - hard drive	P3
34-pin control cable connector - floppy drive	P4

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Factory configured - do not alter	JP2	open
»	Primary floppy address selected	JP3	pins 1 & 2 closed
	Secondary floppy address selected	JP3	pins 2 & 3 closed
	16/32KB BIOS installed	JP4	pins 1 & 2 closed
	8KB BIOS installed	JP4	pins 2 & 3 closed

BIOS ADDRESS - JP5
Address		Jumper A	Jumper B	Jumper C	Jumper D
»	C8000h	open	closed	open	open
	C0000h	closed	open	open	open
	D0000h	open	open	closed	open
	D8000h	open	open	open	closed