Data bus:	16-bit, ISA
Size:	Half-length, full-height card
Hard drive supported:	Two IDE (AT) Interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, 1.44MB, or 2.88MB drives

CONNECTIONS
Function	Location
2-pin connector - drive active LED	JP1
34-pin control cable connector - floppy drive	JP2
40-pin IDE(AT) Interface connector	JP3
10-pin serial port 2 - internal	JP5
16-pin game port - internal	JP6
9-pin serial port - external	JP7
25-pin parallel port - external	JP8

USER CONFIGURABLE SETTINGS
» Function		Location	Setting
»	Parallel port uni-directional	JP10/A	closed
»	Parallel port bi-directional	JP10/A	open
»	Game port enabled	JP10/B	closed
»	Game port disabled	JP10/B	open
»	Floppy controller enabled	JP11/A pins 1 & 2	closed
»	Floppy controller disabled	JP11/A pins 2 & 3	closed
»	IDE (AT) interface enabled	JP11/B pins 1 & 2	closed
»	IDE (AT) interface disabled	JP11/B pins 2 & 3	closed
»	Floppy drive order A:, B: normal	JP11/C pins 1 & 2	closed
»	Floppy drive order A:, B: exchange	JP11/C pins 2 & 3	closed
»	Serial port 1 IRQ4 select	JP11/D pins 1 & 2	closed
»	Serial port 1 IRQ3 select	JP11/D pins 2 & 3	closed
»	Serial port 2 IRQ3 select	JP11/E pins 1 & 2	closed
»	Serial port 2 IRQ4 select	JP11/E pins 2 & 3	closed
»	Parallel port IRQ7 select	JP11/F pins 2 & 3	closed
»	Parallel port IRQ5 select	JP11/F pins 1 & 2	closed

SERIAL PORT 1 CONFIGURATION
» COM		JP12/A	JP12/B
»	COM1 (3F8h)	pins 1 & 2 closed	pins 1 & 2 closed
»	COM3 (3E8h)	pins 2 & 3 closed	pins 2 & 3 closed
»	Disabled	pins 2 & 3 closed	pins 1 & 2 closed

SERIAL PORT 2 CONFIGURATION
» COM		JP12/C	JP12/D
»	COM2 (2F8h)	pins 1 & 2 closed	pins 1 & 2 closed
»	COM4 (2E8h)	pins 2 & 3 closed	pins 2 & 3 closed
»	Disabled	pins 2 & 3 closed	pins 1 & 2 closed

PARALLEL PORT CONFIGURATION
» LPT		JP12/E	JP12/F
»	LPT2 (378h)	pins 1 & 2 closed	pins 1 & 2 closed
»	LPT1 (3BCh)	pins 2 & 3 closed	pins 1 & 2 closed
»	LPT3 (278h)	pins 2 & 3 closed	pins 2 & 3 closed
»	Disabled	pins 1 & 2 closed	pins 2 & 3 closed