Data bus:	16-bit ISA
Size:	Half-length, Full-height card
Hard drive supported:	2 IDE(AT) interface drives
Floppy drives supported:	360KB, 720KB, 1.2MB, 1.44MB

CONNECTIONS
Function	Location
4-pin connector - drive active LED	P1
40-pin IDE(AT) interface connector	P2
34-pin control cable connector - floppy drive	P3

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Floppy drive interface enabled	E1	open
	Floppy drive interface disabled	E1	closed
»	Dual speed floppy drive	E2	open
	Single speed floppy drive	E2	closed
»	Floppy drive interface precompensation 187ns	E3	open
	Floppy drive interface precompensation 125ns	E3	closed
»	Hard drive address 1F0 - 1F7h select	E4	open
	Hard drive address 170 - 177h select	E4	closed

USER CONFIGURABLE SETTINGS(CONTINUED)
Function		Location	Setting
»	Base memory address C800h select	E5	open
	Base memory address CA00h select	E5	closed
»	8KB BIOS select	E6	open
	16KB BIOS select	E6	closed
»	On-board BIOS enabled	E7	closed
	On-board BIOS disabled	E7	open
»	Factory configured - do not alter	E8	pins 1 & 2 closed