Data bus:	32-bit, VL-Bus
Size:	Half-length, half-height card
Hard drive supported:	Two IDE (AT) Interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, 1.44MB or 2.88MB drives

CONNECTIONS
Function	Location
34-pin control cable connector-floppy drive-1	CN1
25-pin parallel port (LPT1/2) - external	CN2
40-pin AT Interface (IDE) connector - IDE-1	CN3
4-pin connector-Drive active LED for IDE-2	CN4
10-pin serial port (COM2/4) - internal	CN5
10-pin serial port (COM1/3) - internal	CN6
40-pin AT Interface (IDE) connector - IDE-2	CN7
4-pin connector-Drive active LED for IDE-2	CN8
34-pin control cable connector-floppy drive-2	CN9X
15-pin game port - internal	JP2

HARD DRIVE INTERRUPT
IDE-1		IDE-2	Jumper J2	Jumper J3
	Disabled	Disabled	open	open
»	IRQ14	Disabled	open	closed
	Disabled	IRQ15	closed	open
	IRQ14	IRQ15	closed	closed

FLOPPY DRIVE PORT ADDRESS
IDE-1		IDE-2	Jumper J2	Jumper J3
	Disabled	Disabled	open	open
»	IRQ14	Disabled	open	closed
	Disabled	IRQ15	closed	open
	IRQ14	IRQ15	closed	closed

WAIT STATE FOR IDE-1
Speed		J20	J21	J22
	16MHz VL Bus Clock	Pins 1 & 2 closed	Pins 1 & 2 closed	Pins 1 & 2 closed
	20 or 25MHz VL Bus Clock	Pins 1 & 2 closed	Pins 1 & 2 closed	Pins 2 & 3 closed
	25 or 33MHz VL Bus Clock	Pins 1 & 2 closed	Pins 2 & 3 closed	Pins 1 & 2 closed
	33MHz VL Bus Clock	Pins 1 & 2 closed	Pins 2 & 3 closed	Pins 2 & 3 closed
	40MHz VL Bus Clock	Pins 2 & 3 closed	Pins 1 & 2 closed	Pins 1 & 2 closed
	50MHz VL Bus Clock	Pins 2 & 3 closed	Pins 1 & 2 closed	Pins 2 & 3 closed
	50MHz VL Bus Clock	Pins 2 & 3 closed	Pins 2 & 3 closed	Pins 1 & 2 closed
»	50MHz VL Bus Clock	Pins 2 & 3 closed	Pins 2 & 3 closed	Pins 2 & 3 closed

WAIT STATE FOR IDE-2
Speed		J23	J24	J25
	16MHz VL Bus Clock	Pins 1 & 2 closed	Pins 1 & 2 closed	Pins 1 & 2 closed
	20 or 25MHz VL Bus Clock	Pins 1 & 2 closed	Pins 1 & 2 closed	Pins 2 & 3 closed
	25 or 33MHz VL Bus Clock	Pins 1 & 2 closed	Pins 2 & 3 closed	Pins 1 & 2 closed
	33MHz VL Bus Clock	Pins 1 & 2 closed	Pins 2 & 3 closed	Pins 2 & 3 closed
	40MHz VL Bus Clock	Pins 2 & 3 closed	Pins 1 & 2 closed	Pins 1 & 2 closed
	50MHz VL Bus Clock	Pins 2 & 3 closed	Pins 1 & 2 closed	Pins 2 & 3 closed
	50MHz VL Bus Clock	Pins 2 & 3 closed	Pins 2 & 3 closed	Pins 1 & 2 closed
»	50MHz VL Bus Clock	Pins 2 & 3 closed	Pins 2 & 3 closed	Pins 2 & 3 closed

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	I/O Channel Ready signal disabled	J1	open
	I/O Channel Ready signal enabled	J1	closed
»	Floppy drive compatilble mode enabled	J7	Pins 2 & 3 closed
	Floppy drive enhanced mode 2 enabled	J7	Pins 1 & 2 closed
»	Uses VL Ready	J14	Pins 2 & 3 closed
	Use CPU Ready	J14	Pins 1 & 2 closed
»	Hard drive enabled	J15	Pins 2 & 3 closed
	Hard drive disabled	J15	Pins 1 & 2 closed
»	Floppy drive enabled	J4, J5, & J6	Pins 2 & 3 closed
	Floppy drive disabled	J4, J5, & J6	Pins 1 & 2 closed
»	Floppy drive port address is 3F0-3F7h	J9	Pins 2 & 3 closed
	Floppy drive port address is 370-377h	J9	Pins 1 & 2 closed
»	Hard drive interrupt is IRQ14	J17	closed
	Hard drive interrupt is disabled	J17	open
»	Serial Port 2 interrupt is IRQ3	J18	closed
	Serial Port 2 interrupt is disabled	J18	open
»	Serial Port 1 interrupt is IRQ4	J19	closed
	Serial Port 1 interrupt is disabled	J19	open
»	Floppy drive interrupt is IRQ6	J35	closed
	Floppy drive interrupt is disabled	J35	open
»	Game Port enabled	J42	closed
	Game Port disabled	J42	open

PARALLEL PORT CONFIGURATION
LPT		Jumper J9	Jumper J27
	LPT3	pins 1 & 2 closed	pins 1 & 2 closed
	Disabled	pins 1 & 2 closed	pins 2 & 3 closed
	LPT2	pins 2 & 3 closed	pins 1 & 2 closed
»	LPT1	pins 2 & 3 closed	pins 2 & 3 closed

PARALLEL PORT INTERRUPT REQUEST
IRQ		Jumper J34	Jumepr J36
»	Parallel port interrupt is IRQ7	open	closed
	Parallel port interrupt is IRQ5	closed	open

SERIAL PORT 1 CONFIGURATION
COM		Jumper J10	Jumper J11
	Disabled	pins 1 & 2 closed	pins 1 & 2 closed
	COM3	pins 1 & 2 closed	pins 2 & 3 closed
	COM2	pins 2 & 3 closed	pins 1 & 2 closed
»	COM1	pins 2 & 3 closed	pins 2 & 3 closed

SERIAL PORT 2 CONFIGURATION
COM		Jumper J12	Jumper J13
	Disabled	pins 1 & 2 closed	pins 1 & 2 closed
	COM4	pins 1 & 2 closed	pins 2 & 3 closed
	COM1	pins 2 & 3 closed	pins 1 & 2 closed
»	COM2	pins 2 & 3 closed	pins 2 & 3 closed