Data bus:	32-bit VL bus
Size:	Three-quarter length, full-height card
Hard drive supported:	Up to seven Fast SCSI-2 devices
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
50-pin SCSI connector - external	P1
34-pin cable connector - floppy drive	P2
50-pin SCSI connector - internal	P3
4-pin connector - drive active LED	P4

USER CONFIGURABLE SETTINGS
Function		Location	Setting
	Synchronous Negotiation disabled	J3	Closed
	Synchronous Negotiation enabled	J3	Open
»	Factory configured - do not alter	J4	Closed
»	Floppy drive controller is primary	J13	Open
	Floppy drive controller is secondary	J13	Closed

BIOS ADDRESS SELECTION
Address	J5	J6
C8000-CEFFFh	Closed	Open
D0000-D7FFFh	Open	Closed
D8000-DFFFFh	Open	Open

INTERRUPT SELECTION
INT	J7	J8	J9	J10	J11	J12
10	Open	Closed	Open	Closed	Open	Open
11	Closed	Open	Open	Open	Closed	Open
12	Open	Open	Closed	Open	Open	Open
14	Closed	Closed	Open	Open	Open	Closed

HARD DISK FORMAT SELECTION
Layout	J1	J2
64 Heads/32 Sectors (Adaptec compatible)	Closed	Closed
255 Heads/63 Sectors (8 GB)	Open	Open