PEAKTRON COMPUTER, INC.
SUPREME I/O
|
| |
|
Data bus: |
16-bit, ISA |
|
Size: |
Half-length, full-height card |
|
Hard drive supported: |
Two IDE (AT) Interface drives |
|
Floppy drives supported: |
Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
|
CONNECTIONS | |
|
Function |
Location |
|
4-pin connector - drive active LED |
J1 |
|
10-pin serial port (COM1/2/3) - internal |
J2 |
|
10-pin serial port (COM2/3/4) - internal |
J3 |
|
40-pin IDE (AT) Interface connector |
J4 |
|
34-pin control cable connector - floppy drive |
J5 |
|
15-pin game port - external |
J6 |
|
25-pin parallel port (LPT1/2/3) - external |
J7 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
| » |
I/O Channel Ready (IOCHRDY) signal enabled* |
JP1 |
closed |
|
I/O Channel Ready (IOCHRDY) signal disabled* |
JP1 |
open | |
| » |
Address latch (ALE) enabled* |
JP2 |
closed |
|
Address latch (ALE) disabled* |
JP2 |
open | |
| » |
Floppy drive enabled |
SW1/switch 6 |
off |
|
Floppy drive disabled |
SW1/switch 6 |
on | |
| » |
Hard drive enabled |
SW1/switch 7 |
off |
|
Hard drive disabled |
SW1/switch 7 |
on | |
|
USER CONFIGURABLE SETTINGS | ||||
|
Function |
Location |
Setting | ||
| » |
Hard drive port address is 1F0-1F7h Floppy drive port address is 3F0-3F7h |
SW1/switch 8 |
off | |
|
Hard drive port address is 170-177h Floppy drive port address is 370-377h |
SW1/switch 8 |
on | ||
| » |
Game Port (J6) enabled |
SW1/switch 9 |
off | |
|
Game Port (J6) disabled |
SW1/switch 9 |
on | ||
|
*See recommended settings table for JP1 & JP2 at the end of this document. | ||||
|
SERIAL PORT CONFIGURATION | |||||
|
COM1 (J2) |
COM2 (J3) |
SW1/switch 1 |
SW1/switch 2 |
SW1/switch 3 | |
| » |
COM1 (3F8h) |
Disabled |
on |
on |
off |
|
COM2 (2F8h) |
Disabled |
on |
off |
on | |
|
COM1 (3F8h) |
COM2 (2F8h) |
n/a |
off |
off | |
|
2B0h |
2B8h |
off |
on |
on | |
|
2E0h |
COM4 (2E8h) |
off |
on |
off | |
|
3E0h |
COM3 (3E8h) |
off |
off |
on | |
|
Disabled |
Disabled |
on |
on |
on | |
|
PARALLEL PORT (J7) CONFIGURATION | |||
|
LPT |
SW1/switch 4 |
SW1/switch 5 | |
| » |
LPT1 (378h) |
off |
off |
|
LPT2 (278h) |
off |
on | |
|
LPT3 (3BCh) |
on |
off | |
|
Disabled |
on |
on | |
|
RECOMMENDED IOCHRDY AND ALE SETTINGS | |||
|
Manufacturer |
Jumper JP1 |
Jumper JP2 | |
|
Western Digital |
open |
open | |
| » |
Miniscribe |
closed |
closed |
|
Conners |
open |
closed | |
|
Fujitsu |
open |
closed | |
|
Seagate |
open |
open | |
|
MISCELLANEOUS TECHNICAL NOTES |
|
Second serial port (J3) is an add-on option and requires installation of an upgrade to function. |
