NCL AMERICA
NCL 5455, NCL 5456
|
| |
|
Data bus: |
16-bit, ISA |
|
Size: |
Half-length, full-height card |
|
Hard drives supported: |
Two ST506/412 MFM drives |
|
Floppy drives supported: |
NCL 5455: Two 360 KB, 720 KB, 1.2 MB or 1.44 MB drives |
|
NCL 5456: None | |
|
CONNECTIONS | |
|
34-pin control cable connector-hard drive |
CN1 |
|
20-pin data cable connector-drive 0 |
CN2 |
|
20-pin data cable connector-drive 1 |
CN3 |
|
34-pin data cable connector-floppy drive (NCL 5455 only) |
CN4 |
|
4-pin connector-drive active LED |
CN5 |
|
5-pin DC power connector |
CN6 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
| » |
Hard drive address is 1F0-1F7h |
JP1 |
pins 1 & 2 closed |
|
Hard drive address is 170-177h |
JP1 |
pins 2 & 3 closed | |
| » |
32Kb ROM enabled |
JP2 |
pins 1 & 2 closed |
|
16Kb ROM enabled |
JP2 |
pins 2 & 3 closed | |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
| » |
Floppy drive port address is 3F2-3F7h |
JP7 |
closed |
|
Floppy drive port address is 372-377h |
JP7 |
open | |
| » |
Cache enabled |
JP11 |
open |
|
Cache disabled |
JP11 |
closed | |
|
4Kb buffer enabled |
JP12 |
open | |
|
16Kb buffer enabled |
JP12 |
closed | |
|
4Kb buffer size selected |
JP14, JP15, JP16 |
pins 1 & 2 closed | |
|
16Kb buffer size selected |
JP14, JP15, JP15 |
pins 2 & 3 closed | |
|
MISCELLANEOUS TECHNICAL NOTES |
|
All other jumpers are for factory tests and configured as follows: JP4, JP5 - closed; JP6, JP8, JP13 - open; JP9, JP10 - pins 2 & 3 closed - do not alter. |
