NCL AMERICA
NCL 536, NCL 537
|
| |
|
Data bus: |
16-bit, ISA |
|
Size: |
Half-length, full-height card |
|
Hard drive supported: |
Two IDE(AT) Interface drives |
|
Floppy drives supported: |
Two 360KB, 720KB, 1.2MB, or 1.44MB drives (NCL 537 only) |
|
CONNECTIONS | |
|
Function |
Location |
|
34-pin control cable connector - floppy drive (NCL 537 only) |
CN1 |
|
40-pin IDE(AT) Interface connector |
CN2 |
|
4-pin connector - Drive active LED |
CN3 |
|
5-pin connector - DC power |
JP11 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
| » |
Floppy drive port address is 3F2-3F7h |
JP1 |
Pins 1 & 2 closed |
|
Floppy drive port address is 372-377h |
JP1 |
Pins 2 & 3 closed | |
| » |
Floppy drive interrupt is IRQ6 |
JP3 |
Pins 1 & 2 closed |
|
Floppy drive interrupt is IRQ10 |
JP3 |
Pins 2 & 3 closed | |
| » |
DMA Acknowledge channel is DACK2 |
JP4 |
Pins 1 & 2 closed |
|
DMA Acknowledge channel is DACK3 |
JP4 |
Pins 2 & 3 closed | |
| » |
IRQ Buffer mode disabled |
JP5 |
Pins 1 & 2 closed |
|
IRQ Buffer mode enabled |
JP5 |
Pins 2 & 3 closed | |
| » |
DMA Request channel is DRQ2 |
JP6 |
Pins 1 & 2 closed |
|
DMA Request channel is DRQ3 |
JP6 |
Pins 2 & 3 closed | |
| » |
Hard Drive interrrupt is IRQ14 |
JP7 |
Pins 1 & 2 closed |
|
Hard Drive interrrupt is IRQ15 |
JP7 |
Pins 2 & 3 closed | |
| » |
I/O Channel Ready disabled |
JP8 |
open |
|
I/O Channel Ready enabled |
JP8 |
closed | |
| » |
Hard drive port address is 1F0-1F7h |
JP10 |
open |
|
Hard drive port address is 170-177h |
JP10 |
closed | |
| » |
Normal operation mode enabled |
E1 |
open |
|
Diagnostic mode enabled |
E1 |
closed | |
