Card Type	Hard drive controller
Data Bus	32-bit PCI
Card Size	Quarter-length, full-height card
Hard Drives supported	Up to 60 Ultra or Ultra Wide SCSI devices
Floppy drives supported	None

CONNECTIONS
Function	Location	Function	Location
50-pin SCSI connector channel 0 - internal	J1	50-pin SCSI connector channel 2 - internal	J7
4-pin connector - drive active LED	J2	Drive active LED	J8
68-pin SCSI connector - external	J3	68-pin SCSI connector channel 2 - internal	J9
50-pin SCSI connector channel 1 - internal	J4	50-pin SCSI connector channel 3 - internal	J10
Drive active LED	J5	Drive active LED	J11
68-pin SCSI connector channel 1 - internal	J6	68-pin SCSI connector channel 3 - internal	J12

TERMINATION CONFIGURATION FOR MULTIPLE INITIATORS

Note: Jumpers JP1, JP2, JP3, and JP4 set active termination on each specific SCSI bus so it is always on. The setting is used only when the adapter shares the SCSI bus with an adapter in another computer. If this computer can be turned off, closing the jumper will insure that active on-board termination is on all the time, regardless of whether power is applied or not.