Data Bus	16-bit ISA
Card Size	Full-length, full-height card
Hard Drives supported	Two ST-506/412(MFM) drives
Floppy drives supported	Two 360KB, 720KB, 1.2MB

CONNECTIONS
Function	Location	Function	Location
34-pin cable connector - floppy drive	J1	34-pin cable connector - hard drive	J5
20-pin data cable connector - drive 0/1	J3	4-pin connector - drive active LED	J6
20-pin data cable connector - drive 0/1	J4

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	IDE primary address selection	JP1	Pins 2 & 3 closed
	IDE secondary address selection	JP1	Pins 1 & 2 closed
»	Floppy drive primary address selection	JP2	Pins 2 & 3 closed
	Floppy drive secondary address selection	JP2	Pins 1 & 2 closed
	200 step selection enabled	JP3	Closed
	17.6 step selection enabled	JP3	Open
»	Factory configured - do not alter	JP5	Unidentified
»	Factory configured - do not alter	JP6	Unidentified