Data Bus	16-bit ISA
Card Size	Half-length, full-height card
Hard Drives supported	Two IDE (AT) drives
Floppy drives supported	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location	Function	Location
16-pin game port	CN1	9-pin serial port 1 - external	CN5
40-pin IDE(AT) connector	CN2	25-pin parallel port - external	CN6
34-pin cable connector - floppy drive	CN3	4-pin connector - drive active LED	JP1
10-pin serial port 2 - internal	CN4

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Factory configured - do not alter	J9	Unidentified
»	Serial port 1 enabled	JP2	Pins 1 & 2 closed
	Serial port 1 disabled	JP2	Pins 2 & 3 closed
»	Game port enabled	JP3	Pins 1 & 2 closed
	Game port disabled	JP3	Pins 2 & 3 closed
»	Floppy drive interface enabled	JP4	Pins 1 & 2 closed
	Floppy drive interface disabled	JP4	Pins 2 & 3 closed
»	Parallel port I/O address 378h select	JP5	Pins 1 & 2 closed
	Parallel port I/O address 278h select	JP5	Pins 2 & 3 closed
»	IDE(AT) interface enabled	JP6	Pins 1 & 2 closed
	IDE(AT) interface disabled	JP6	Pins 2 & 3 closed
»	Serial port 2 enabled	JP7	Pins 1 & 2 closed
	Serial port 2 disabled	JP7	Pins 2 & 3 closed
»	Controller is only one in system (I/O address is 1F0-1F7, 3F6, 3F7)	JP8	Pins 1 & 2 closed
	Other controllers are in system (I/O address is 170-177, 376, 377)	JP8	Pins 2 & 3 closed
»	Serial port 1 COM1 enabled	JP9	Pins 1 & 2 closed
	Serial port 1 COM3 enabled	JP9	Pins 2 & 3 closed
»	Serial port 2 COM2 enabled	JP10	Pins 1 & 2 closed
	Serial port 2 COM4 enabled	JP10	Pins 2 & 3 closed