KIMPSION INTERNATIONAL
WA6-V4
|
Q4 /92 |
Data bus: 16-bit, ISA
Size: Full-length, half-height card
Hard drives supported: Two MFM ST506 drives
Floppy drives supported: Four 360KB, 720KB, 1.2MB, or 1.44MB
Sector interleave: 1:1
|
CONNECTIONS | |
|
Function |
Location |
|
4-pin connector-drive active LED |
CN1 |
|
20-pin data cable connector-drive 1 |
CN2 |
|
20-pin data cable connector-drive 0 |
CN3 |
|
34-pin control cable connector-hard drive |
CN4 |
|
34-pin data cable connector-floppy drives 0 and 1 |
CN7 |
|
34-pin data cable connector-floppy drives 2 and 3 |
CN8 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
| » |
Hard drive port address is 1F0-1F7h |
JP5 |
pins 2 & 3 closed |
|
Hard drive port address is 170-177h |
JP5 |
pins 1 & 2 closed | |
| » |
Floppy drive port address for CN7 is 3F0-3F7h |
JP6 |
pins 2 & 3 closed |
|
Floppy drive port address for CN7 is 370-377h |
JP6 |
pins 1 & 2 closed | |
| » |
Bracket ground option disabled |
JP9 |
open |
|
Bracket ground option enabled |
JP9 |
closed | |
| » |
Floppy drive port address for CN8 is 370-377h |
JP10 |
closed |
|
Floppy drive port address for CN8 is 3F0-3F7h |
JP10 |
open | |
|
DRIVE SELECT MODE JUMPERS | ||
|
Drive Size |
Switch 1, 3, 5 or 7 |
Switch 2, 4, 6, or 8 |
|
360KB |
on |
on |
|
720KB |
on |
off |
|
1.2KB |
off |
on |
|
1.44KB |
off |
off |
|
Floppy drive 0 uses SW1/switches 1 and 2 Floppy drive 1 uses SW1/switches 3 and 4 Floppy drive 2 uses SW1/switches 5 and 6 Floppy drive 3 uses SW1/switches 7 and 8 | ||
