Chipset	Tekram
Maximum Onboard Memory	Unidentified
Data Bus	32-bit VESA local bus
Card Size	Full height, full length
Hard Drives Supported	Four IDE-AT devices
Floppy Drives Supported	Unidentified

CONNECTIONS
Function	Label	Function	Label
4-pin drive active LED	JP1	40-pin secondary IDE(AT) connector	CN2
4-pin connector to speaker	JP2	34-pin cable connector - floppy drive	CN3
40-pin primary IDE(AT) connector	CN1

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	Primary IDE channel noise filter mode 1 enabled	JDR0	Open
	Primary IDE channel noise filter mode 2 enabled	JDR0	Closed
»	Secondary IDE channel noise filter mode 1 enabled	JDR1	Open
	Secondary IDE channel noise filter mode 2 enabled	JDR1	Closed
»	Factory configured - do not alter	JP3	Unidentified
»	Factory configured - do not alter	RP1	Unidentified
»	Factory configured - do not alter	RP2	Unidentified
»	Factory configured - do not alter	RP3	Unidentified
»	Factory configured - do not alter	RP4	Unidentified
»	Factory configured - do not alter	RP5	Unidentified
»	Factory configured - do not alter	RP6	Unidentified
»	Factory configured - do not alter	RP7	Unidentified
Note:The exact implementation of the noise filter modes are unidentified. However, mode 1 is compatible with most hard drives.

DRAM CONFIGURATION

The configuration of the memory is unidentified.